Explosion proof Zone 1, IIC Linear Light Fittings

Fast, Tool-Assisted Maintenance Access

• Smart Central Locking System opens the fitting quickly using the dedicated box spanner (M8/A-F13) accessory, cutting maintenance downtime compared to a fully bolted enclosure.
• Available with a protection-against-accidental-contact accessory that shields maintenance technicians and electrical installers from live conductive parts while the fitting is open, and raises the degree of protection to IP20 when fitted.

Robust Electrical Protection

• Surge protection up to 2kV as standard, protecting the luminaire and its LED driver from electrical transients on industrial power networks.
• Operates across 220–240V AC or DC input, 50–60 Hz, with through-wiring rated up to 3x10A using 5-conductor, 2.5 mm² cable, supporting daisy-chained installations across multiple fittings on one circuit.
• Ballast: Inventronics-OT FIT driver.

High Efficiency, Long Service Life

• 130 lm/W luminaire efficacy across both size variants, genuinely efficient output for a hazardous-area-rated fitting.
• Rated for over 60,000 hours of service life even at +55°C ambient temperature, holding up under sustained heat load in hot process environments or direct outdoor sun exposure.
• Colour rendering index ≥80 and 5700K cool-white colour temperature for accurate visual work conditions.

Built for Harsh Industrial Environments

• IP66/IP67 ingress protection and IK10 impact resistance, up to 20J, in a glass-fibre-reinforced polyester resin enclosure, resistant to the chemical and mechanical stresses typical of process plant environments.
• Silicone sealing material and light grey, RAL 7035, enclosure finish.
• Suitable for mounting heights up to 10 metres, illuminating large surfaces, equipment, and objects both indoors and outdoors.

Flexible Mounting for Varied Installations

• Pole mounting via the dedicated pole mounting sleeve accessory for 42mm pipe diameter, plus a broader range of pole mounting accessories covering Ø38–60mm in both 1.4301 and 1.4404 stainless steel.
• Ceiling and wall mounting brackets allow the lamp to be swiveled in 15° steps for aiming flexibility.
• Pipe clamp accessories, R1¼", R1½", R2", support direct pipe mounting with variable mounting distance via a mounting rail.
• Ring bolt, M8, option for suspension mounting, fitted directly into insert nuts on the luminaire.

Available Sizes

Selection Table

All variants: clear translucent cover, 5700K cool-white, no luminaire disconnection, with diffuser.

Applications

• Oil & gas facilities – Zone 2 process areas where a gas-hazardous atmosphere is possible but not continuously present, such as areas surrounding but outside a primary Zone 1 source.
• Specialty chemical and pharmaceutical plants – general area and equipment lighting in classified plant zones.
• Large-surface and elevated lighting – mounting heights up to 10 metres suit warehouse-scale spaces, tank farms, and outdoor process areas.
• Pole-mounted outdoor lighting – with the pole mounting sleeve or pole mounting accessories, for yard and perimeter lighting around classified areas.
• Dust-hazardous environments – Zone 21/22 rating extends coverage to bulk material handling and processing areas with combustible dust.