Finch PG ( Three Phase Online UPS )

Finch PG is a three phase, online double conversion UPS with a 0.9 output power factor. This design delivers 12.5% more usable power compared to conventional UPS systems built with a 0.8 power factor.

Finch PG uses DSP technology and active input power factor correction to maintain stable output voltage and consistent power quality at all times. Its dual mains input feature adds extra power reliability in areas with poor or unstable power supply. It's available from 10KVA to 30KVA, making it ideal for larger commercial and industrial loads.

Request A Quote Chat With Us Data Sheet

Topology

Online double conversion UPS: Delivers clean, stable power at all times.
Input power factor correction (PFC) of 0.99: Improves energy efficiency and reduces power waste.
Automatic bypass: Shifts the load to the mains supply automatically if there's an overload or internal fault, keeping your systems running.
Output power factor of 0.9: Delivers more usable real power from the same UPS rating.

Flexibility

Configurable design: Set up as three phase input with three phase output, or three phase input with single phase output (available on 10KVA and 20KVA models).
Hot standby configuration: Ensures consistent, high-quality power for mission-critical applications.
Battery cold start: Powers on the UPS directly from the battery, even without utility power.
Parallel up to 3 units: Add units for extra capacity, extra redundancy, or both.
Flexible/settable battery configuration: Adjust battery setup to match your backup time needs.

Total Cost of Ownership

Wide input voltage tolerance: Reduces the number of switchovers to battery mode, helping your battery last longer.
Green and energy-saving design: Achieves up to 98% AC/AC efficiency in ECO Mode, cutting down electricity costs.

Communication Options

Emergency power off (EPO): Built-in as standard, with remote UPS shutdown support in case of fire or other emergencies.
Intelligent communication slot (optional): Supports Ethernet, RS485 (Modbus), or potential-free contacts.
RS232 for local monitoring: Included as standard.
Remote control via SNMP card: Manage your UPS remotely over the network.
Centralized monitoring system: Monitor all connected UPS units on your network from one place.
Informative LCD display: Shows detailed, real-time UPS status at a glance.

Spec	10 KVA (3P/3P)	20 KVA (3P/3P)	30 KVA (3P/3P)	10 KVA (3P/1P)	20 KVA (3P/1P)
Power Output	9kW	18kW	27kW	9kW	18kW
Configuration	Three Phase In / Three Phase Out	Three Phase In / Three Phase Out	Three Phase In / Three Phase Out	Three Phase In / Single Phase Out	Three Phase In / Single Phase Out
Nominal Input Voltage	400/415V (3ph+N) (all models)
Input Voltage Range	190–520V AC (at 50% load) or 305–478V AC (at 100% load) (all models)
Output Voltage	400/415V (3ph+N)	400/415V (3ph+N)	400/415V (3ph+N)	200/208/220/230/240V AC	200/208/220/230/240V AC
Voltage Regulation	±1% (all models)
Waveform	Pure Sinewave (all models)
Transfer Time	Zero — (all models)
AC Mode Efficiency	90.5%	91.5%	92.1%	91.5%	91.5%
ECO Mode Efficiency	96%	96%	96%	97%	97%
Battery Type	SMF VRLA / Vented Battery (all models)
Battery Numbers	20 Nos (16–20 adjustable) (all models)
Battery Recharge Time	9 hours to 90% (all models)
Parallel Operation	Up to 3 units, for capacity and/or redundancy (all models)
Net Weight	38 kg	40 kg	64 kg	28 kg	40 kg
Noise Level	Less than 60dB at 1 meter (all models)
Communication	RS232/USB (standard); optional SNMP, Modbus (RS485), potential-free contacts
Certifications	BIS, ISO 9001, ISO 14001, ISO 45001 (all models)

FAQ

Frequently Asked Questions

Find answers to common questions about our products and solutions.

Finch PG is a three phase online double conversion UPS, available from 10KVA to 30KVA. It uses DSP technology and active input power factor correction to keep output voltage stable and power quality consistent at all times, even in areas with poor power supply.

Finch PG has an output power factor of 0.9, which means it delivers 12.5% more usable power compared to conventional UPS systems built with a 0.8 power factor. This helps you get more real power from the same UPS rating.

Yes. The 10KVA and 20KVA models can be configured as three phase input with single phase output, alongside the standard three phase input/three phase output configuration available across all capacities.

Yes. Finch PG can be paralleled up to 3 units, giving you extra capacity, extra redundancy, or both, as your power needs grow.

You can buy Finch PG directly from NEXGEN Electromech Pvt. Ltd., an authorized distributor, dealer, and trader for this product. We offer special pricing for bulk orders, dealers, and system integrators, with delivery across India, Nepal, Bhutan, Bangladesh, and Vietnam. Request a quote through our website, call +91 9874833686, or email sanjay.pathak@nexgenelectromech.in.

GET IN TOUCH