Falcon 7000 ( Three Phase Online UPS )

Falcon 7000 is a three phase input, three phase output, transformerless online UPS built for large, mission-critical power loads. It's available from 40KVA to 500KVA, making it well suited for data centers, hospitals, manufacturing plants, and other large industrial or commercial operations.

Designed and manufactured in India to global IEC standards, Falcon 7000 is built to handle the harsh power conditions common across India, high ambient temperature, wide voltage fluctuations, and continuous DG-set operation during power cuts. Its transformerless design gives it a higher power density than conventional UPS systems, so you get more real power in a smaller footprint. It can also run continuously at 40°C without needing precision air conditioning, helping you save on cooling costs.

Request A Quote Chat With Us Data Sheet

Reliability

Built for harsh conditions: Designed and tested for high ambient temperature, high humidity, wide input voltage swings, and continuous DG-set operation.
Advanced thermal protection: On-chip temperature sensors protect IGBTs from overheating.
Short-circuit protection: Pulse-by-pulse current limiting and desaturation protection guard IGBTs from short circuits.
Capacitor protection: Internal protection against overload and failure prevents capacitor bursting.
N+1 fan redundancy: If a module fails, capacity reduces , the system doesn't shut down.
Simplified CANBUS communication: Reduces control wiring complexity for more reliable, trouble-free operation.
Phase sequence correction: Prevents unnecessary battery discharge if the input phase sequence changes, keeping the UPS on mains power.

Scalability & Flexibility

Parallel up to 8 units: Scale for extra capacity or redundancy as your power needs grow.
Uniform load sharing: Space vector pulse width modulation (SPPWM) keeps load balanced across units, even with changing demand.
True redundant design: The Parallel Redundant System (PRS) architecture has no single point of failure, making it suitable for Tier-1 to Tier-4 data center designs.
Handles all load types: Supports step loads, 100% non-linear loads, and loads with leading or lagging power factor.
4-quadrant rectifier: Handles regenerative loads without issue.

Green Technology & Savings

High input power factor (PF > 0.99): Reduces unwanted harmonics and avoids utility penalties for low power factor.
Low current harmonic distortion (THDi < 5%): Protects DG sets, cables, and switchgear from being over-sized, saving on infrastructure costs.
Intelligent Eco Mode: Delivers up to 99% efficiency. The system monitors input power quality and only enables Eco Mode when conditions are stable , switching back to double conversion mode in under 2ms if needed.
Regenerative energy feedback: The 4-quadrant IGBT rectifier feeds regenerative power back to the mains, adding further energy savings.
Advanced battery management: Auto float-boost charging, three-stage charging with auto equalization, and optional temperature-compensated charging all work together to extend battery life. Compatible with Lithium-Ion batteries.
Higher power density: Delivers around 10% more real power at 25°C compared to a conventional UPS of the same rating.

Serviceability & User Friendliness

Low Mean Time To Repair (MTTR): Modules sit on pull-out trays for quick diagnostics and replacement.
Built-in event logging: An SD card and RAM store all events, alarms, and error logs for remote or on-site analysis.
On-site testing: Falcon 7000 can run a full-load test on itself and perform battery discharge tests without needing extra load banks.
Intuitive HMI: Comes standard with an LCD screen and LED indicators; an optional TFT touchscreen shows true RMS readings for over 25 UPS parameters.
Wide connectivity options: Supports RS232, RS485, Modbus RTU, SNMP (10/100Mbps, optional), 3G/4G remote monitoring (optional), and Profibus (optional), plus six programmable alarm contacts.

Total Cost of Ownership

Runs at up to 40°C without precision air conditioning, cutting cooling-related capex and opex.
Long-life capacitors: Power-electronic-grade capacitors are built to last the UPS's lifetime, avoiding replacement costs.
Manual bypass provided for safe maintenance without disturbing connected loads.

Falcon 7000 also carries Intertek, CE, and STQC certifications.

Spec	Details
Capacity Range	40KVA to 500KVA
Configuration	Three Phase Input / Three Phase Output
Topology	Transformerless, Online Double Conversion, 32-bit DSP controlled
Nominal System Voltage	415V AC, 3 Phase + Neutral (±15%)
Input Voltage	415V AC (±15%), 3 Phase + Neutral
Input Frequency	50Hz (46–54Hz), or 50Hz/60Hz auto-sensing (±0.1Hz)
Input Power Factor	≤0.99
Input Current Distortion (THDi)	Less than 5%
Output Voltage	400V/415V AC (±1%), 3 Phase (380V optional)
Output Power Factor	0.9 nominal; handles 0.6 to unity within KVA/KW rating
Output Waveform	Sinusoidal
Output THD	Less than 2% (linear load); less than 5% (non-linear load, per IEC 62040-3)
Transient Response	±5%, recovers to 98% within one cycle
Overload Capacity	110% for 60 min; 125% for 10 min; 150% for 60 sec
Efficiency	Up to 99% in Energy Saving (Eco) Mode
Bypass Voltage & Frequency	415V AC (+15%), 50Hz (+2.5Hz), settable, 3 Phase + Neutral
Bypass Transfer Time	Synchronous mode: no break; Asynchronous mode: less than 10ms
Manual Bypass	Provided
Parallel Operation	Up to 8 units, for capacity and/or redundancy
Operating Temperature	0°C to 40°C
Storage Temperature	0°C to 70°C
Relative Humidity	Up to 95% RH (non-condensing)
Maximum Operating Altitude	1000m (without de-rating)
Enclosure Protection Grade	IP20
Acoustic Noise @ 1m	68–72 dBA (varies by model, per ISO 3746)
Cable Entry	Top / Bottom (standard)
Ventilation	Forced air cooling
Cabinet Finish	Standard RAL color
Communication (Standard)	RS232
Communication (Optional)	RS485, Modbus RTU, SNMP, Ethernet RJ45, 3G/4G Datacard, Profibus
Certifications	IEC 62040-1/2/3, ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007, Intertek, CE, STQC

FAQ

Frequently Asked Questions

Find answers to common questions about our products and solutions.

Falcon 7000 is a three phase, transformerless online UPS, available from 40KVA to 500KVA. It's designed and manufactured in India to global IEC standards, built specifically to handle harsh power conditions like high temperature, humidity, and voltage fluctuations.

A transformerless design removes the bulky isolation transformer found in older UPS systems. This gives Falcon 7000 a smaller footprint and higher power density , it delivers around 10% more real power at 25°C than a conventional UPS of the same rating, while also improving overall efficiency.

Falcon 7000 offers an intelligent Eco Mode that delivers up to 99% efficiency. It continuously monitors input power quality and only runs in Eco Mode when conditions are stable, switching back to full double conversion mode in under 2 milliseconds if needed, so efficiency never comes at the cost of protection.

Yes. Falcon 7000 can be paralleled up to 8 units, using a Parallel Redundant System (PRS) architecture with no single point of failure. This makes it suitable for Tier-1 to Tier-4 data center designs.

You can buy Falcon 7000 directly from NEXGEN Electromech Pvt. Ltd., an authorized distributor, dealer, and trader for this product. We offer special pricing for bulk orders, dealers, and system integrators, with delivery across India, Nepal, Bhutan, Bangladesh, and Vietnam. Request a quote through our website, call +91 9874833686, or email sanjay.pathak@nexgenelectromech.in.

GET IN TOUCH