Rish CBCT
- Turns Ratio : 600:1
- Leakage current measurement : 30mA to 30A
- Cap for Secondary Terminal Connection :
- Protective cap for connectors on either side of the CT ensures that the terminal is well covered from external entities. The cap also contains sealing provision.
- Side Mounting Provision:
- CBCT can be mounted both horizontally as well as vertically considering the practical challenges occured while on site installation.
- Cable tie Clips:
- Cable tie clips are located on the CT to ensure that busbar is centrally aligned so as to get absolute output
Single phase RJ 12 CT
- Transmission of measuring signal to the measuring unit via RJ12 connection cable
- RJ12 socket for fast connection eliminate wiring errors.
- Various mounting options like bus bar mounting, wall mounting, Universal din-rail mounting
- Sealing cap for tamper-proof connection
3 Phase RJ12 Current Transformer
- Compact in size.
- Wide range of system current Ratings.
- Hinged terminal cover.
- Various mounting options like DIN rail mounting, Wall mounting.
- Accuracy Class 1 and 0.5 (Square Type)
- Low Burden
RISH Compact Split Core CT
- Hinged Split Core
- Swing open for ease of installation
- Compact size
- Two options for Bus Bar Mounting
- Cable Tie provision for faster installation
- Safety Plug in shorting link
- Available with M4 Size Terminals
- Provided with 3 Meter wire for 1A Output
- Provided with 1 Meter wire for 5A Output
- Wide range of system current ratings
- Assured Core contact with Latching Type Snap fitment
- Vibration Resistant Design
Nano 3 phase CT
Rish Nano CT is a very reliable, efficient and robust current transformer for measurement of AC current.
It provides 100 mA AC output. It can be used in
-
- Measurement of AC current for frequency 50/60Hz.
- High electric isolation between primary conductor and output.
- Easy and safe electrical connection.
- Primary rated current 63A,125A and 250A AC.
- High system voltage
- 1500 mm long Secondary Cable for 63 A,125 A & 250 A product.
- Circuit breakers.
- Earth Leakage Protection.
RISH RESIN CAST METERING CT
- Compact size.
- Wide range of system current Ratings.
- Transparent terminal cover.
- Wall mounting.
- Terminal with self lifting screw.
Rish resin cast CTs are square type and molded with epoxy resin. Metering CTs feature with transparent terminal cover & wide range of primary current ratings, case widths.
- Wall or foot mounting options available.
RISH SUMMATION CT
- Easy Installation
- Nickel Plated Secondary Terminals with +/- Screws
- Terminal Protection IP10
- Rated Short Time Thermal Current-60 X In
- Dynamic Short circuit Current 2.5 X Ith
- Highest Voltage of Equipment 720V
- Instrument Security Factor FS5 & FS10
3 Phase Current Transformer
- Compact size.
- Wide range of system current Ratings.
- Hinged terminal cover.
- Various mounting options like DIN rail mounting, Wall mounting.
- Terminal with self lifting screw with dual connection facility giving access from both sides of transformers.
RISH TW Series Round CTs
- Comprehensive measurement of class accuracy.
- Cost effective moulded case current transformer.
- Wide range of system current ratings, bus bar sizes, case widths and apertures.
- Various mounting options like wall mounting, cable mounting, bus bar mounting, DIN rail mounting.
- Wire sealable terminal covers.
RISH TW-E Series Round CTs
- Test voltage 3KV 50Hz for 1minute.
- System voltage 720V max.
- Ratio ratings from 50/5A to 5000/5A.
- Comprehensive measurement of class accuracy.
- Wide range of system current ratings and bus bar sizes.
- Cts manufactured as per IEC 60044-1 & IS 2705-1
RISH X mer Series Square type CTs
- Comprehensive measurement of class accuracy.
- Cost effective moulded case current transformer.
- Wide range of system current ratings, bus bar sizes, case widths and apertures.
- Various mounting options like wall mounting, cable mounting, bus bar mounting, DIN rail mounting.
- Wire sealable terminal covers.
RISH Xmer Split Core CT s
- Test voltage 4KV 50Hz for 1minute.
- System voltage 720V max.
- Ratio ratings from 100/5A to 1500/5A.
- Comprehensive measurement of class accuracy.
- Wide range of system current ratings and bus bar sizes.
- Cts manufactured as per IEC 60044-1 & IS 2705-1
- Operation free installation is possible.