Incremental Encoder- Heavy Duty
Technical data - electrical ratings
- Voltage supply 5 VDC ±5 %
- 9...26 VDC
- 9...30 VDC
- Consumption w/o load 100 mA
- Resolution (steps/turn) 1...1250
- Phase shift 90±20°
- Scan ratio 40...60 %
- Reference signal Zero pulse, width 90°
- Sensing method Optical
- Output frequency 120 kHz
- Output signals K1, K2, K0 + inverted
- Output circuit TTL/RS422
- HTL (power linedriver)
- Interference immunity DIN EN 61000-6-2
- Emitted interference DIN EN 61000-6-4
- Approval UL approval / E256710
Standard Duty Incremental Encoder
Features
- Precise optical sensing technique with latest technology
- Electric interface TTL and HTL
- Clamping or synchro flange
- High protection max. IP 65 IP 67
- High resistance to shock and vibrations
- Wide range voltage supply 4.75 - 30 V DC
- Increments per turn max. 5000
Heavy Duty Rotary Encoders
Special features:
- Special rugged aluminium housing with bearings at both ends of hollow shaft up to 20 mm or 17 mm cone 1:10
- For operation in some potentially environments. Please see the operating instruction for detailed information.
- Extended protection class IP 66 with labyrinth seal (dust) or special sealing system (marine air)
- Protection against induced shaft currents
- Option: Earthing brush to divert shaft currents generated by lGBT converters
- Temperature range -40 °C +100 °C, optionally down to -50 °C
- Logic level HTL with power transistors or logic level TTL (RS-422) with supply voltage +5 V or +9 +26 V (version R with internal regulator)
- Internal connecting terminals or terminal box
- Twin encoder with two separate systems: HOG 10 G
Baumer Hubner Encoder
Features
- Protected electronics during shaft mounting
- Terminal box, connector M23 or cable output
- Compact, robust housing
- Steel shaft with high shaft loads up to 300 N
- Operating temperature -40...+100 °C
- (version with cable -40...+80 °C)
- Isolated blind hollow shaft
Optional
- Hybrid bearing
- Function control with EMS
Baumer Hubner - Heavy Duty Encoder
- Robust, compact housing
- Two bearings with large distance, one at each end
- High shaft load up to 450 N
- Shock resistant up to 250 g
- Shaft insulation up to 2.8 kV
- Highest operating speed 10000 rpm
- TTL output driver for cable length up to 550 m
- Terminal box, turn by 180°
Tachogenerator
- High response speed
- Open circuit voltage 10...150 mV per rpm
- Shaft 7-14 mm with flange
- Top signal quality over the total rotational speed
- range by patented Longlife technique
- Recognition of sense of rotation
- No auxiliary energy source required
- Technical data - electrical ratings
- Reversal tolerance 0.1 %
- Linearity tolerance 0.15 %
- Temperature coefficient 0.05 %/K (open-circuit)
Encoders
Premium grade raw material and progressive technology and machinery is used in their making at our vendors unit under the guidance and supervision of experts. Baumer - Hubner Encoders are known for their efficient performance, reliable quality, accuracy, effectiveness and have a long service life. We offer these at highly competitive prices.
Encoders Baumer Hubner
Features
- TTL output driver for cable length up to 500 m
- Very high resistance to shock
- EURO-flange B10 / solid shaft 011 mm
- Optional
- Function control with EMS (Enhanced Monitoring System)
- Second shaft end